Hisense Roku TV remote every button turns off (5 Ways Fix)

The Roku remote is an essential component for controlling your TV and accessing Roku’s features. However, there are various issues Hisense Roku TV remote every button turns off, including problems caused by corroded batteries, unpairing between the TV and remote, remote malfunction, HDMI interference, and weak signal.

If you find yourself struggling with any of these issues, this comprehensive guide will provide you with insights into the exact causes behind each problem and offer practical solutions to resolve them. By following these steps, you can effectively troubleshoot and fix your Hisense Roku TV remote every button turns off. Let’s delve into the details!

Hisense Roku TV remote every button turns off, solution how to solve

Experiencing Hisense Roku TV remote every button turns off can be quite annoying. There are several factors that contribute to this issue, but fortunately, there are solutions available. In this article, we will explore the main causes behind this problem and provide effective troubleshooting steps to resolve each issue.

1. Corroded Remote Batteries

One of the primary culprits for buttons malfunctioning on your Roku remote is damaged or corroded batteries. Corrosion can lead to license issues with the remote’s buttons, resulting in unintended actions such as turning off the TV. The following factors can contribute to this problem:

  • Release of hydrogen gas from the Roku remote batteries.
  • Acid leakage from the batteries.
  • Physical damage to the batteries.
  • Slow responsiveness due to low battery power.
  • Storing the batteries within the remote for an extended period.


To address this issue, you can either clean the corroded batteries or replace them. Here are the steps to clean corroded batteries:

  1. Remove the battery door on the remote.
  2. Take out the batteries.
  3. Spray lemon juice or vinegar on and around the corroded areas.
  4. Thoroughly scrub the corroded parts of the batteries.

Additionally, consider the following measures:

Ensure that the batteries are not leaking acid or releasing gas.
Replace physically damaged or low-power batteries.
Avoid storing batteries within the remote for prolonged periods.

2. TV and Remote Unpairing

Another reason why all the buttons on your Roku remote may turn off the TV is due to the TV and remote becoming unpaired. This can occur for various reasons, including:

  • TV system updates.
  • Changes in the Wi-Fi network.
  • Low battery power.
  • Using the TV with a different Roku box.
  • General technical glitches.


If your TV and Roku remote become unpaired, follow these steps to pair them again:

  1. Disconnect your TV from the electrical outlet or unplug it.
  2. Wait for 30 seconds, then reconnect your TV by plugging it back in.
  3. Locate the pairing button on your Roku remote (usually found on the battery compartment or the device’s front).
  4. Press and hold the remote’s pairing button for five seconds or until you see the Roku remote blinking.

Note: Older Roku remote models use an IR sensor instead of Wi-Fi. If an IR pointer Roku remote fails to pair, ensure there are no obstructions between the remote and the TV.

3. Defective Roku Remote

A malfunctioning Roku remote can also cause all the buttons to work simultaneously, leading to the TV turning off regardless of the button pressed. Physical damage, corroded batteries, or system malfunctions are common causes for this issue.


If the remote itself is faulty, you should reset it. Follow these steps to reset your Roku remote:

  1. Remove the batteries from your Roku remote.
  2. Disconnect the power supply of the Roku box.
  3. Navigate to Settings > System > Restart.
  4. Wait for 20 seconds, then reconnect the power supply to your Roku box.
  5. Wait for the Roku box’s home screen to load.
  6. Reinsert the batteries into your Roku remote.

Note: The above steps apply to IR sensor Roku remotes as well.

Other general fixing methods include:

Replacing physically damaged Roku remotes and batteries.
Upgrading your TV and remote system.

4. HDMI Interference

Interference from nearby HDMI cables can disrupt the signal of your Roku remote, causing all the buttons to function or turn off the TV unexpectedly.


To resolve this issue, use an HDMI cable extender. This device allows the streaming stick to be positioned farther away from the HDMI port on your TV, reducing interference.

5. Low Power Signal for the Remote

A low power signal can also cause every button on your Roku remote to turn off the TV. Defective power sources or outdated remote device systems are often responsible for this problem.


Ensure that your Roku remote is not operating in a low-power signal environment. If your TV’s power signal is low, consider replacing the device’s power source. Additionally, try upgrading the remote’s system by pairing it with the TV again or performing a reset.

Note: You can also read Hisense Roku TV Blinking Red Light (Quick Fix Solution 2023)


Why does my Roku remote keep turning the TV off?

There could be a few reasons why your Roku remote keeps turning the TV off:

  1. Low Battery: The most common reason is low battery power. Ensure that you replace the batteries in your Roku remote with fresh ones.
  2. Interference: Sometimes, other electronic devices or nearby appliances can interfere with the signals between the remote and the TV, causing unintended actions. Try moving any potential sources of interference away from the TV.
  3. Pairing Issues: It’s possible that the remote has lost its pairing with the TV. In this case, you may need to re-pair the remote following the instructions provided by Roku.
  4. Software Glitch: Occasionally, a software glitch can cause the remote to behave unexpectedly. Restarting both the Roku device and the TV might resolve the issue.

FAQ 2: Why does my Hisense Roku TV keep powering off?

If your Hisense Roku TV keeps powering off, consider the following possibilities:

  1. Sleep Timer: Check if the sleep timer is enabled. The sleep timer automatically turns off the TV after a specified period of inactivity. You can adjust or disable the sleep timer settings in the TV’s menu.
  2. Power Saving Mode: Some TVs have a power-saving mode that automatically turns off the TV after a certain period of time. Look for power-saving settings in the TV’s menu and adjust them accordingly.
  3. Firmware Update: Make sure your TV’s firmware is up to date. Sometimes, outdated firmware can cause unexpected behavior. Check the Hisense support website for any available firmware updates.
  4. Faulty Power Source: Ensure that the power source you are using is stable and providing consistent power. Unstable power supply or faulty power outlets can cause the TV to power off randomly.

How do you reset a Hisense Roku TV remote?

To reset a Hisense Roku TV remote, you can follow these steps:

  1. Remove the batteries from the remote control.
  2. Unplug the power cord from your Hisense Roku TV.
  3. Wait for about 10 seconds.
  4. Plug the power cord back into the TV.
  5. Wait for the TV to fully power on.
  6. Insert the batteries back into the remote control.
  7. Press and hold the pairing button, usually located inside the battery compartment of the remote, for a few seconds until the LED light on the remote starts blinking.
  8. Release the pairing button and wait for the remote to reconnect with the TV. This process may take a moment.
  9. Once the remote is successfully paired, you can use it to control your Hisense Roku TV.

Why is my Hisense TV not responding to the remote or buttons?

If your Hisense TV is not responding to the remote or buttons, consider the following troubleshooting steps:

  1. Check the batteries: Ensure that the batteries in the remote control are not depleted. Replace them with fresh batteries to eliminate this as a possible cause.
  2. Verify line of sight: Make sure there are no obstructions between the remote and the TV’s infrared receiver. Remove any objects that may be blocking the signal.
  3. Remote pairing: If your remote has a pairing button, press and hold it for a few seconds to initiate the pairing process. Follow the instructions provided by Hisense to pair the remote with the TV.
  4. Reset the TV: Sometimes, a soft reset can resolve issues with unresponsive TVs. Unplug the power cord from the TV and wait for about 10 seconds before plugging it back in. Then, try using the remote or buttons again.
  5. IR sensor issues: If the TV has an infrared (IR) sensor, it might be malfunctioning. In such cases, it’s advisable to contact His
  6. ense customer support or a professional technician to diagnose and repair the issue.

Note: The specific steps and options may vary depending on the model and firmware version of your Hisense Roku TV.


Encountering of Hisense Roku TV remote every button turns off can be exasperating. By identifying the specific causes and implementing the appropriate solutions outlined in this article, you can effectively troubleshoot and resolve these issues. Remember to clean or replace corroded batteries, re-pair the TV and remote if they become unpaired, reset a defective remote, address HDMI interference, and ensure an adequate power signal for your Roku remote.

You May Also Like

Leave a Reply

Your email address will not be published. Required fields are marked *