Are you facing issue Hisense Tv Won’t Turn On Red Light Flashes 4 Times? This guide aims to shed light on the possible causes behind this problem and provide practical troubleshooting steps to help you get your TV up and running again.
When encountering a Hisense TV that won’t turn on and displays a red light flashing 4 times, it typically indicates a specific error code. Understanding the root cause of this issue can save you time, money, and unnecessary stress.
One possible reason for this problem could be a faulty power supply or a loose connection. It’s crucial to ensure that the power cord is securely plugged into both the TV and the power outlet. Additionally, try plugging the TV into a different outlet to rule out any power supply issues.
Another potential cause is a malfunctioning mainboard. If the TV’s mainboard is damaged or experiencing a software glitch, it can prevent the TV from powering on correctly. In such cases, a firmware update or even a replacement may be necessary.
In this troubleshooting guide, we delve into the various techniques you can employ to address common TV problems and perform a successful reset. By following these steps, you’ll gain a deeper understanding of how to resolve issues affecting your Hisense television.
To begin the process of rectifying any malfunctions and resetting your TV, please refer to the following guide.
Troubleshooting Hisense Tv Won’t Turn On Red Light Flashes 4 Times
In this article, we will discuss the primary reasons why your Hisense TV’s red light flashes four times and provide you with quick solutions for each issue.
1. Issue with the Power Supply Board
One of the main culprits for your Hisense TV flashing codes is a faulty power supply board. This board converts the higher voltage input energy source into an output that meets your TV’s requirements.
To determine if the power supply board is causing the red light to blink, you should check for the following signs of damage or malfunction:
- High voltage fluctuations or power surges
- Blown capacitors
- Non-functioning or damaged internal components on the board
- A faulty transformer
- Faulty resistors
- Broken MLCC components
- Power board charging electricity beyond its capacity
- Overheating of the TV
Solution:
To resolve this issue, you can either repair or replace the power supply board. Before doing so, ensure that the power supply board is the cause of the blinking light. You can do this by removing the back part of your TV and using a tester to check the functionality of the board. If the board or its components do not respond, it indicates a faulty power supply board. The following steps can help you fix the problem:
- Install a dynamic voltage stabilizer to prevent power surges and voltage fluctuations.
- Replace any blown capacitors, non-functioning internal components, faulty transformers, broken MLCC parts, defective resistors, or the power board itself.
- Make sure your TV is not overheating and that the power supply board is not drawing excessive power.
- Avoid running your TV for extended periods or plugging too many appliances into a single electrical outlet.
2. TV Stuck in Standby Mode
Sometimes, your Hisense TV can get stuck in Standby Mode, either due to prolonged operation or accidental activation. When this happens, your TV fails to turn on and blinks the red light four times.
In Standby Mode, your TV will not respond to manual buttons or remote control signals.
Solution:
To resolve this issue, follow these steps:
- Using the remote control, check if your TV’s power light LED responds to the remote’s signal.
- If the power light responds but your TV doesn’t turn on, you need to reset your TV and take it out of standby mode.
How to Get Hisense TV Out of Stuck Standby Mode:
When your TV is stuck in Standby Mode and the red LED light blinks four times, follow these steps:
- Disconnect your Hisense TV’s power cord and turn off the TV.
- Leave your TV unplugged for at least 60 minutes to allow the internal components to restore their functionality.
- Press and hold your TV’s power button (not the remote’s power button) for 1 minute (60 seconds) while reconnecting the power cord to the outlet.
- After 1 minute, directly connect your TV’s power cord to the wall outlet, bypassing any surge protectors or power strips.
- By completing these steps, you will reset your TV’s power board and take it out of standby mode.
3. Issue with the LED Back Array
Another possible cause for your Hisense TV blinking red light is a problem with the LED back array. Your TV may function normally, but the red power light will consistently flash four times with a 3-second pause.
The LED back array or board can become faulty due to the following reasons:
- Damaged, broken, or defective backlight
- Excessive electricity voltage variation or power surges
- A faulty backlight inverter
- Exposure to extreme heat or cold
- The LED driving circuit not supplying adequate voltage
Solution:
To resolve this issue, follow these steps:
- Check your TV’s LED light panel and replace the defective board.
- Other effective ways to fix this problem include replacing broken or damaged backlights, faulty backlight inverters, or defective backlight strips, as well as installing a voltage stabilizer to reduce high voltage variation.
- During a power surge, it is advisable to turn off your TV.
- Keep your TV away from extreme heat or cold.
- Ensure that your TV’s LED driving circuit is providing enough voltage.
How to Reset Your Hisense Smart TV
Resetting your Hisense TV can help resolve minor issues, bugs, and glitches. It will restore your TV’s previous settings and original functionality.
To fix the issue of your Hisense TV blinking red light four times, follow these simple reset steps:
- Use the remote to turn off your TV and unplug it from the electrical outlet.
- Remove the power cord from the back of your TV and perform a power cycle.
- Wait for 60 seconds, then reconnect the power cord to your TV’s back and the power cable to the outlet.
- Finally, switch on your TV, and the reset process will be complete.
FAQ
Q1: Why is my Hisense Tv Won’t Turn On Red Light Flashes 4 Times?
A: A flashing red light on a Hisense TV indicates a specific error code. In this case, the four flashes typically suggest a power-related issue. It could be due to a faulty power supply, a loose connection, or an internal component problem.
Q2: What can I do to troubleshoot My Hisense Tv Won’t Turn On Red Light Flashes 4 Times?
A: Start by checking the power source and ensuring that the TV is properly plugged in. Try using a different power outlet or a different power cable to rule out any power-related issues. If the problem persists, it’s recommended to contact Hisense customer support or a qualified technician for further assistance.
Q3: Are there any other possible reasons why my Hisense TV won’t turn on and the red light flashes 4 times?
A: While power-related issues are common in this scenario, there could be other factors at play. It’s possible that there’s a problem with the TV’s internal circuitry, such as a defective mainboard or a malfunctioning component. Additionally, software glitches or firmware issues could also prevent the TV from turning on properly.
Q4: Should I attempt to repair my Hisense TV myself if the red light flashes 4 times and it won’t turn on?
A: Unless you have experience and expertise in TV repairs, it’s generally not recommended to attempt repairs yourself. Hisense TVs, like most modern electronics, are complex devices and require specialized knowledge to diagnose and fix issues correctly. It’s best to contact Hisense customer support or a professional technician who can assess the problem and provide appropriate solutions.
Conclusion
if you want to fix it yourself. Hisense Tv Won’t Turn On Red Light Flashes 4 Times. it’s worth considering the possibility of a hardware component failure. This could include issues with the backlight, the capacitors, or other internal components. In these cases, seeking professional assistance or contacting Hisense’s customer support can help you diagnose and resolve the problem effectively.
Remember, before attempting any troubleshooting steps, it’s essential to refer to the manufacturer’s documentation or consult their support team for specific guidance tailored to your Hisense TV model.
