My hisense tv won’t turn on red light flashes 5 times (Quick Fix Solution)
When encountering a Hisense Tv won’t turn on red light flashes 5 times, it is often attributed to several underlying problems. These include a faulty cable connection, power supply issues, a defective power board, malfunctioning backlight, or even an HDMI glitch. Fortunately, there are steps you can take to address this issue and potentially resolve it.
One recommended solution is to perform a reset on your TV. Resetting the device can often rectify the flashing red light problem. However, if the issue persists even after resetting, it may be necessary to replace certain components. Specifically, the faulty power supply unit, a problematic power board, or a faulty backlight might require attention.
In order to assist you further, this troubleshooting guide aims to explore the primary causes of the flashing red light issue on Hisense TVs. Additionally, it provides quick solutions for each of these causes. By following the suggestions outlined in this article, you can save valuable time and find effective ways to address the problem at hand. So, let’s delve into the details and discover the solutions you need.
Hisense tv won’t turn on red light flashes 5 times
Major Causes and Solutions for Hisense TV Flashing Red Light 5 Times
1. Defective Cable Connection
One of the primary reasons why your Hisense Roku TV flashes the red light 5 times is a faulty cable connection. Your TV relies on a cable connection to receive power from the wall outlet. When the connection becomes defective, the TV doesn’t receive sufficient power to turn on, resulting in the five-time blinking of the power light. The following factors can contribute to this issue:
- Cable exposed to extreme heat, humidity, or cold temperatures
- Broken or damaged cable
- Smashed or bent cable
- Cable failure to transmit signals
- TV overheating
- Chewed outer protective sheath of the cable
- Poor cable connection between the TV and power box
- Faulty outlet
Solution:
If your Hisense TV blinks the red light five times, start by resetting the TV and checking the cable connection. Unplug both ends of the cable, from the TV port and the wall socket, and then plug them back in.
If the TV continues to blink five times, consider the following solutions:
- Ensure the TV cable is protected from extreme temperatures and humidity.
- Replace any damaged, broken, smashed, or bent cables and defective power outlets.
- Ensure that the TV cable is transmitting a signal effectively.
- Ensure a high-quality cable connection between the TV and power box.
- Avoid running the TV for extended periods to prevent overheating.
2. Power Supply Issue
When a TV receives insufficient or excessive power, it can’t operate smoothly. TVs require the right amount of voltage to function properly, and a power supply issue can prevent the TV from turning on, causing the power light to flash. The following factors may contribute to power supply problems:
- Faulty power supply unit or damaged wall socket
- Tripped circuit breaker
- Broken, damaged, or worn-out wires
- Loose cable connection between the TV and power unit
- Power surges
- High voltage fluctuations
- Ground faults or short circuits
Solution:
Check the power supply source of your TV and ensure the cable connection is secure. Additionally, consider the following solutions:
- Replace a defective wall socket or outlet, tripped circuit breaker, or damaged, broken, or faulty wires.
- Install a dynamic voltage stabilizer to prevent short circuits or power surges.
- Tighten the cable connection between the TV and power unit.
3. Bad Power Supply Board
The wall outlet supplies high voltage to your Hisense TV, and the TV’s power board converts it into a lower voltage. When the power supply board malfunctions, the TV may receive fluctuating or no voltage, resulting in failure to turn on. The following factors can contribute to this issue:
- Power surges
- Faulty capacitors
- Malfunctioning resistors
- Defective transformer
- Damaged, worn-out, or faulty internal components
- Broken MLCC components
- Power board receiving excessive power
- TV overheating
Solution:
Check the power supply board (PS board) on the back of your TV to determine if it’s functioning correctly. If the board fails to convert voltage and supply the lower voltage, it should be replaced immediately. Consider the following additional solutions:
Turn off your TV during a power surge.
Replace malfunctioning capacitors, bad transformers, blown capacitors, broken MLCC parts, and damaged, broken, or melted internal components.
Ensure your TV is not receiving excessive power.
Avoid operating too many appliances on a single outlet to prevent TV overheating.
4. Malfunctioning Backlight
The backlight in your Hisense TV adjusts the intensity of the TV’s lighting source based on the room’s lighting environment. When the backlight malfunctions, it disrupts the TV’s operation, causing the front LED light
to blink five times. The following factors may contribute to this issue:
- Damaged, broken, or faulty backlight
- Insufficient power on the TV’s mainboard
- Non-functioning backlight inverter
- Short circuits or circuitry issues
- Power surges
- Incorrect voltage supply from the LED driving circuit
Solution:
Turn off your TV and shine a light from your phone on the screen. If you can see something, it means the TV backlight is broken and should be replaced. Consider the following additional solutions:
Replace the defective backlight and its faulty inverter.
Ensure your TV is receiving sufficient power.
Prevent power surges and short circuits by installing a voltage stabilizer.
5. HDMI Glitch
The HDMI cable in your Hisense TV combines the audio and video interfaces, improving sound and picture quality. However, an HDMI glitch can prevent the TV from receiving the audio and video connection, causing the screen to flicker and the red light to blink five times. The following root causes may contribute to this issue:
- Poor connection between the TV and HDMI cable
- Broken, damaged, or defective HDMI cable
- Frequent plugging and unplugging of the cable
- Non-functioning HDMI port
- Incorrectly or loosely connected HDMI cable
Solution:
If your TV’s connected external devices or console turn off without changing the input source, it indicates an HDMI glitch. To resolve this issue, follow these steps:
- Turn off your Hisense TV and disconnect the power cord from the wall socket.
- From the box or TV’s end, remove the HDMI cable and wait for one minute.
- Re-plug the cable and turn on your TV.
- Plug your Hisense TV’s HDMI cable back into HDMI 1 port and connect it to the HDMI 1 input channel.
If the above steps fail to fix the issue of the red light blinking five times, consider the following solutions:
- Ensure a perfect connection between the TV and HDMI cable.
- Replace or repair a faulty HDMI cable and use the correct port.
- Avoid frequent plugging and unplugging of the HDMI cable.
By addressing these major causes and implementing the suggested solutions, you can resolve the issue of your Hisense Tv Won’t Turn On Red Light Flashes 5 Times.
How To Reset Your Hisense TV
Resetting your TV to its default settings can often help resolve this problem. Follow these simple steps to reset your Hisense TV and potentially fix the blinking issue:
- Start by turning off your Hisense TV.
- Unplug the TV from the wall socket to disconnect the power supply.
- Locate the power cable at the back of your TV and disconnect it.
- Perform a power cycle by waiting for 30-60 seconds.
- Reconnect the power cable to both the outlet and the back of your Hisense TV.
- Switch on your Hisense TV, and the reset process will be completed.
If resetting your TV doesn’t resolve the blinking issue and the LED light continues to flash, it’s possible that your Hisense TV has a more severe hardware problem. In such cases, it is advisable to seek professional assistance to diagnose and repair the issue.
FAQ
Why won’t my hisense tv won’t turn on red light flashes 5 times?
If your Hisense TV doesn’t turn on and the red light flashes five times, it indicates a specific error code. This code usually points to a power supply or motherboard issue. It’s recommended to contact Hisense customer support or a qualified technician for assistance.
What should I do if my hisense tv won’t turn on red light flashes 5 times?
If your Hisense TV is not turning on and you observe the red light flashing five times, try a power cycle by unplugging the TV from the power outlet, waiting for a few minutes, and then plugging it back in. If the issue persists, refer to the user manual or contact Hisense customer support for further troubleshooting steps.
Can a software glitch cause my Hisense TV to not turn on and display a red light flashing five times?
While it’s possible for a software issue to cause problems with your Hisense TV, the specific symptom of a red light flashing five times usually indicates a hardware problem. However, performing a firmware update can sometimes address certain software-related issues. Check the Hisense website for firmware updates and follow their instructions carefully.
Is it safe to attempt DIY repairs if my Hisense TV won’t turn on, and the red light flashes five times?
Unless you have experience and expertise in TV repairs, it’s generally not recommended to attempt DIY repairs when it comes to complex electronics like TVs. Hisense TVs, like most modern TVs, contain delicate components that require specialized knowledge and tools. It’s best to contact Hisense customer support or a qualified TV technician to avoid causing further damage and ensure your safety.
